Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 710

1
2
Suction hose
Marking
STEERING - Power Steering Oil Hoses
REMOVAL SERVICE POINT
AA" EYE BOLT/RETURN TUBE REMOVAL
1. Loosen the crossmember mounting bolts and nuts, and
lower the crossmember to a position so that the eye bolts
or return tube at the steering gear side can be removed.
NOTE
In this case, do not remove the crossmember
mounting bolts and nuts.
2. Remove the eye bolts or return tube.
INSTALLATION SERVICE POINTS
"AA O RING INSTALLATION
No.
1
2
"BA PRESSURE HOSE ASSEMBLY/SUCTION HOSE
Install the pressure hose assembly and suction hose as
illustrated.
Pressure hose
assembly
Notch
ID × Width mm
11.0 × 1.9
13.0 × 1.9
INSTALLATION
37A-33