Siemens SINAMICS S120 Function Manual page 467

MT_ZSW
Status word for the "central probe" function.
Table 10- 39 Description of MT_ZSW (status word for the "central probe" function)
Bit Meaning
0 Digital input probe 1
1 Digital input probe 2
2 Digital input probe 3
3 Digital input probe 4
4 Digital input probe 5
5 Digital input probe 6
6...7 Reserved
8 Sub-sampling probe 1
9 Sub-sampling probe 2
8 Sub-sampling probe 3
9 Sub-sampling probe 4
8 Sub-sampling probe 5
9 Sub-sampling probe 6
10.. Reserved
15
MTn_ZS_F and MTn_ZS_S
Display of the measuring time determined
The measuring time is specified as a 16-bit value with a resolution of 0.25 μs.
Features of the central probe
● The time stamps from probes in more than one drive can be transferred simultaneously in
● The time in the controller and drive unit is synchronized via CU_STW1 and the
● A higher-level controller can then use the time stamp to determine the actual position
● The system outputs a message if the measuring time determination function in the probe
Drive functions
Function Manual, (FH1), 10/2008, 6SL3097-2AB00-0BP5
–
–
–
–
–
–
–
–
–
–
–
–
–
–
a single telegram.
CU_ZSW1.
Note: The controller must support time synchronization!
value of more than one drive.
is already in use (see also p0488, p0489, and p0580).
Communication PROFIBUS DP/PROFINET IO
10.1 Communication according to PROFIdrive
Remarks
Display of digital inputs
For telegram 392, in addition, probes 3 and 6
–
Not yet carried out.
For telegram 392, in addition, probes 3 and 6
–
BICO
CO: r0688
467