Smart Infeed Open-Loop Control - Siemens SINAMICS S120 Function Manual

Hide thumbs Also See for SINAMICS S120:

Table of Contents

1.2 Smart Infeed

Smart Infeed open-loop control

The Smart Line Module can be controlled via the BICO interconnection by means of

terminals or the field bus. The operating status is indicated on the operating display r0002.

The missing enable signals for operation (r0002 = 00) are mapped in parameter r0046. The

EP terminals (enable pulses) must be connected in accordance with the Equipment Manual.

The drive unit must have been commissioned for the first time.

Acknowledge error

Errors that are still present but the causes of which have been rectified can be

acknowledged by means of a 0/1 edge at the "Acknowledge error" (p2103) signal.

Function Manual, (FH1), 10/2008, 6SL3097-2AB00-0BP5

Drive functions