Optional) Installing A Fingerprint And Card Reader With A Keypad - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide
Step 3 Remove the M2.5 screws (set aside) of the fingerprint and card reader and take off the
baseplate, as shown by (3) and (4) in
Step 4 Secure the baseplate to the baffle plate using two M3x8 countersunk screws, as shown by (5)
in Figure
Step 5 Route the fingerprint and card reader cable through the cable hole in the baffle plate, as shown
by (6) in
Step 6 Secure the fingerprint and card reader to the baseplate, as shown by (7) and (8) in
15-49.
----End

15.4.9.2 (Optional) Installing a Fingerprint and Card Reader with a Keypad

Context
The BOM number of a fingerprint and card reader with a keypad is 02070174.
Preparations
Tool: Phillips screwdriver
Materials: fingerprint and card reader with a keypad and accessories
Procedure
Step 1 Remove the baffle plate from the installation position, as shown by (1) in
Issue 02 (2018-03-31)
Keep the protruding plane of the baffle plate flush with the end plane of the pad mounting kit.
15-49.
Figure 15-49.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 15-49.
15 Installing Monitoring Devices
Figure
Figure 15-50.
214