Routing A Water Detection Cable - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide
Step 2 Connect the other end of the conversion cable to the water detector.
Figure 15-83 Connecting the water detector
----End

15.9.4 Routing a Water Detection Cable

Context
Do not contact the water detection cable with metal, for this action will cause a false alarm.
Take protective measures when routing a water detection cable.
Preparations
Materials: water detection cable fastener, water detection cable and accessories
Document: water detection cable routing position diagram
Procedure
Step 1 Plan the installation position for the fastener of the water detection cable. Ensure that the
water detection cable placed on the fastener is in good contact with the floor.
Step 2 Tear off the protection paper from the rear of the fastener, and then securely attach the
fastener to the floor.
Issue 02 (2018-03-31)
The water detection cable and conversion cable are interconnected through the male and female
connectors.
One fastener is provided for a 1 meter long water detection cable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15 Installing Monitoring Devices
240