Huawei FusionModule2000 Installation Manual page 263

FusionModule2000 Smart Modular Data Center
Installation Guide
Step 2 Close the door, place the cutout template near the door top at the far end of the door axis,
mark the mounting holes, and drill holes, as shown in
Figure 16-13 Marking mounting holes
(1) Door frame
Step 3 Remove the hoisting strip using the delivered hex key.
Two hex socket screws need to be removed in this step.
Figure 16-14 Removing the hoisting strip
Step 4 Secure the hosting strip using the delivered screws, as shown by (1) in
Issue 02 (2018-03-31)
(2) Cutout template
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
16 (Optional) Installing In-Room Access Control
Figure 16-13.
(3) Door panel
Devices and Cameras
Figure 16-15.
254