Optional) Installing Side Plates For It Cabinets - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide
Figure 6-1 Removing screws
Step 3 Remove the cabinet from the pallet and place the cabinet in the installation position.
----End

6.2 (Optional) Installing Side Plates for IT Cabinets

Context


Preparations
Tools: Phillips screwdriver, flat-head screwdriver
Material: side plate
Procedure
Step 1 Install floating nuts.
Issue 02 (2018-03-31)
If there is a base, place the cabinet on the base.
If an IT cabinet is not equipped with side plates and placed in the end position, side
plates need to be installed to ensure that the outer side of an end cabinet has side plates.
If two cabinets share side plates and placed in the end position, the side plates need to be
adjusted to ensure that the outer side of an end cabinet has side plates.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Installing the Network Cabinet, IT Cabinet, and Battery
Cabinet
59