FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Dual-Row
Aisle Containment, 208 V)
Figure 3-36 Removing the screws
Step 2 Remove the cabinet from the pallet.
----End
3.4 (Optional) Adjusting IT Cabinet Side Plates
Context
IT cabinets are not furnished with all side plates.
Procedure
Step 1 Install floating nuts.
Step 2 Secure a side plate to the cabinet using four M6 screws and the floating nuts.
Step 3 Install other side plates in the same way.
Issue 01 (2017-07-30)
Before installing an IT cabinet, adjust the side plate position based on the side plate
labels and ensure that plates are installed on the outer side of end cabinets.
Install two side plates for each end cabinet, one in the upper part and the other in the
lower part.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Installation Preparations
47