Optional) Installing An In-Room Single Door Magnetic Lock - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide
Figure 16-12 Installing the magnet
(1) Rubber pad
Step 7 (Optional) Adjust the magnet.
1.
2.
----End
16.4 (Optional) Installing an In-Room Single Door
Magnetic Lock
Prerequisites


Context


Procedure
Step 1 Fold the delivered cutout template along the dotted line by 90° , as shown by (2) in
16-13.
Issue 02 (2018-03-31)
If the magnet cannot attract the door properly after power-on, place a magnetized metal
part near the magnet to check whether the magnet provides a proper magnetic force.
If the magnetic lock and the magnet do not work properly, check and troubleshoot the
circuit.
Verify that the room door is a revolving single-swing wooden door, and that the door
frame is wider than 42 mm.
The cable routes are planned.
The BOM number of a single door magnetic lock is 02070081.
A single door magnetic lock is installed on a room door.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
16 (Optional) Installing In-Room Access Control
Devices and Cameras
Figure
253