Siemens SINUMERIK 840D sl Programming Manual page 276

Measuring variants
3.5 Measure tool (turning)
Parameter
G code program
Parameters Description
PL Measuring plane (G17 - G19) -
Calibration data set (1 - 6)
Tool posi‐
● Axial (←)
tion
● Radial (↓)
Parameters Description
DFA Measurement path
TSA Safe area for the measurement result
TZL Tolerance range for work offset
TDIF Tolerance range for dimensional difference monitoring
Measuring variant, milling on the turning machine
Procedure
The part program or ShopMill program to be edited has been created and you are in the editor.
Parameter
ShopMill program
Parameter Description
T Name of the probe
D Cutting edge number (1 - 9)
Calibration data set (1 - 6)
F Calibration and measuring fee‐
drate
X Start point X of the measurement mm
276
Unit
-
-
1. Press the "Meas. tool" softkey.
2. Press the "Drill" softkey.
ShopTurn program
Parameters Description
T
D
β
Z
X
Y
Unit
-
-
-
mm/min
Programming Manual, 12/2017, 6FC5398-4BP40-6BA1
Name of the tool to be meas‐
ured
Cutting edge number (1 - 9)
Calibration data set (1 - 6)
Tool alignment with swivel axis
● (0 degrees)
● (90 degrees)
● Value entry
Start point Z of the measure‐
ment
Start point X of the measure‐
ment
Start point Y of the measure‐
ment
Unit
-
-
-
Degrees
mm
mm
mm
Unit
mm
mm
mm
mm
Measuring cycles