Cycle982 Measuring Cycle Parameters - Siemens SINUMERIK 840D sl Programming Manual

Measurement result display only for the calculated kinematics measuring version.
5)
If the measurement result should also be displayed after the 1st to the 3rd measurement, then this is realized by setting
the channel-specific SD 55613 $SCS_MEA_RESULT_DISPLAY.
Rotary axis 2 only for kinematics with two rotary axes
6)
Limit value angular segment of the rotary axis. Value range of S_TNVL between 20 and 60 degrees. For values of S_TNVL
7)
< 20 degrees, inaccuracies can be expected as a result of the measuring inaccuracies in the micrometer range of the probe.
If the limit value is violated, then error message 61430 is output – with a display of the minimum limit value.
Spindle is tracked in the probe switching direction if SD54760 bit 17 = 1
8)
4.1.13

CYCLE982 measuring cycle parameters

PROC CYCLE982(INT S_MVAR,INT S_KNUM,INT S_PRNUM,INT S_MA,INT S_MD,REAL S_ID,REAL S_FA,REAL
S_TSA,REAL S_VMS,REAL S_STA1,REAL S_CORA,REAL S_TZL,REAL S_TDIF,INT S_NMSP,INT S_EVNUM,INT
S_MCBIT,INT _DMODE,INT _AMODE)
Measuring cycles
Programming Manual, 12/2017, 6FC5398-4BP40-6BA1
4.1 Overview of measuring cycle parameters
Parameter lists
333