Displaying A User Log In The Form Of A Measurement Results Screen - Siemens SINUMERIK 840D sl Programming Manual

Description
2.14 Miscellaneous functions
Log extract:
**************************************************************************************************
Date
Protocol: /_N_WKS_DIR/_N_WP1_WPD/_PROT_TE_977_BOHR_TXT
Program : _N_TE_977_BOHR_MPF
Workpiece no.: 123
*************************************************************************************************
HOLE DM 20H7
LARGESTDIMENSION:20.021
SMALLESTDIMENSION:20.000
SPINDLETEMPERATURE:68.7 DEG
----------------------------------------------------------------------------------------------------------------
1
Results measure: 1 Hole / CYCLE977
----------------------------------------------------------------------------------------------------------------
Correction into: Work offset, coarse
X
Y
Z
Results:
X
Y
Diameter
---------------------------------------------------------------------------------------------------------------
2.14.3.6

Displaying a user log in the form of a measurement results screen

A user log is displayed on the screen in the form of a measurement results screen if the
following conditions are fulfilled:
● CYCE150: Measurement result screen "on"
– "User log" log type OR
– log "off"
● Calling CYCLE160
When selecting "last measurement" log, CYCLE160 should not be called!
70
: 2013-08-05
: 977 / 101
G508
Coarse [mm]
--------------------------------------------------------------------------
-0.0200
0.0300
-0.0128
--------------------------------------------------------------------------
Setpoint
12.9900
7.5000
24.0000
Time: 11:59:10
Time: 11:58:10
Rotation [deg]
0.0000
45.0000
0.0000
Measured
12.9700
7.5300
23.8400
Programming Manual, 12/2017, 6FC5398-4BP40-6BA1
Difference
-0.0200 mm
0.0300 mm
-0.1600 mm
Measuring cycles