Specifications; Specifications - Toro Workman 3000 Series Service Manual

Specifications

General Specifications
Item
Clutch pedal free play
Transaxle countershaft end play
Transaxle ring gear backlash
Liquid gasket (transaxle case gasket)
Transaxle oil
Oil capacity (Fig. 2)
Figure 2
1. Dipstick
Torque Specifications
Item
Clutch cover bolt
Drive shaft yoke to stub axle flange nut
Drive shaft clamp bolt
Transaxle differential case to ring gear capscrews
Transaxle shift arm locknuts
Transaxle case capscrews
Transaxle PTO cover capscrews
Workman 3000/4000 Series
1
Page 6 – 3 Rev. D
Specification
19 mm (.75 in.) min.
0.00 – 0.10 mm (.000 – .0039 in.)
0.08 – 0.18 mm (.0031 – .0071 in.)
with max. variation of 0.05 mm (.0019 in.)
at three different points checked
Three–Bond 1216 or Loctite 599
Dexron III ATF
7.5 qt. U.S. (7.1 liter) system capacity
Specification
7.0 – 9.0 Nm (5 – 7 ft–lb)
300 – 340 Nm (220 – 250 ft–lb)
47 – 57 Nm (35 – 42 ft–lb)
24.5 – 29.5 Nm (18.5 – 22 ft–lb)
24.5 – 29.5 Nm (18.5 – 22 ft–lb)
24.5 – 29.5 Nm (18.5 – 22 ft–lb)
15 – 17 Nm (11 – 13 ft–lb)
Drive Train