Safety Instructions; Safety Instructions; Before Operating - Toro Workman 3000 Series Service Manual

Table of Contents
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . 1
Supervisor Responsibilities . . . . . . . . . . . . . . . . . . . 1
Before Operating . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
While Operating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Safety Instructions

The WORKMAN 3000 Series vehicles are designed and
tested to offer safe service when operated and main­
tained properly. Although hazard control and accident
prevention partially are dependent upon the design and
configuration of the machine, these factors are also de ­
pendent upon the awareness, concern, and proper
training of the personnel involved in the operation, main­
tenance and storage of the machine. Improper use or
maintenance of the machine can result in injury or
death.
This is a specialized utility vehicle designed for off-road
use. its ride and handling will have a different feel than
what drivers experience with passenger cars or trucks.
So take time to become familiar with your WORKMAN
vehicle.
Supervisor's Responsibilities
1. Make sure operators are thoroughly trained and fa­
miliar with the Operator's Manual and all labels on the
vehicle.
2. Be sure to establish your own special procedures and
work rules for unusual operating conditions (e.g. slopes

Before Operating

3. Operate the machine only after reading and under­
standing the Operator's Manual. A replacement Opera-
tor's Manual is available by sending complete model
and serial number to:
The Toro Company
8111 Lyndale Avenue South
Minneapolis, Minnesota 55420.
Workman 3000 Series
Maintenance and Service . . . . . . . . . . . . . . . . . . . . . 3
Jacking the Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Using Bed Safety Support . . . . . . . . . . . . . . . . . . . . 5
Not all of the attachments that adapt to the Workman ve ­
hicle are covered in this manual. See the specific Opera-
tor's Manual provided with attachment for additional
safety instructions. READ THESE MANUALS.
TO REDUCE THE POTENTIAL FOR INJURY
OR DEATH, COMPLY WITH THE FOLLOWING

SAFETY INSTRUCTIONS.

too steep for vehicle operation). Use the 3rd High Lock ­
out switch if high speed could result in a safety or vehicle
abuse situation.
Use the Model and Serial Number when referring to your
machine. If you have questions about this Service
Manual, please contact:
The Toro Company
Commercial Service Department
8111 Lyndale Avenue South
Minneapolis, Minnesota 55420.
Page 1 - 1
Chapter 1
Safety
CAUTION
Safety