36. Apply multi–purpose grease to O–ring and insert O–
ring into groove of transaxle case. If installing P.T.O., in
sert 2 dowel pins in transaxle case. Install P.T.O. or
cover. Tighten capscrews and nut with lockwasher to a
torque of 15 – 17 Nm (11 – 13 ft–lb).
37. Install bell housing and secure with capscrews (Item
2). Tighten capscrews to a torque of 24.5 – 29.5 Nm
(18.5 – 22 ft–lb).
38. Install extension spring (Item 1).
Drive Train
1
Page 6 – 54
2
1
Figure 130
2
Figure 131
Workmand 3000 /4000 Series
3