Toro Workman 3000 Series Service Manual page 291

34. Install differential lock arm (Item 1) onto fork shaft.
Insert lock pin into fork shaft and arm. Pay attention to
direction of slit in lock pin.
35. Apply silicone sealant to mating surface of upper
cover (Item 2). Pay attention to direction of cover and
install. Tighten capscrews (Item 1) to a torque of 24.5 –
29.5 Nm (18.5 – 22 ft–lb).
Workman 3000/4000 Series
2
1
Page 6 – 53
1
Figure 128
Figure 129
Drive Train