Special Tools - Toro Workman 3000 Series Service Manual

Special Tools

Pressure Test Pressure Gauge Kit
Use this kit to take various pressure readings for diag­
nostic tests of the liquid propane (LP) gas fuel system.
The kit contains one each of the following: 0 to 160 PSI
test gauge, 0 to 5 PSI test gauge, and 0 to 10 inches
(H O) vacuum gauge, vacuum hose, and assorted fit­
2
tings. Use gauges as recommended in Testing section
of this chapter. These gauges and fittings can be ob­
tained locally or through a local IMPCO Technologies
distributor. When acquiring this equipment through local
suppliers, make sure to check test port fitting sizes as il­
lustrated in the Testing section of this chapter.
Figure 2
Page 11 – 5 Liquid Propane Gas Conversion Kit
Rev. D
Workman 3000/4000 Series