Table of Contents
Advertisement
146/407
Connection points
6.2.3
X29.1, X29.2, Multi-Ethernet
View
Properties
Standard
Compatibility
Recommended cable type
Bosch Rexroth AG R911335703_Edition 04
The signals at X29.1 are directly looped through to X29.2.
Connection
Signal name
1
TD+
2
TD-
3
RD+
4
n. c.
5
n. c.
6
RD-
7
n. c.
8
n. c.
Housing
●
Ethernet
●
Type: RJ-45, 8-pin
100Base-TX according to IEEE 802.3u
●
According to CAT5e; ITP type of shield (Industrial Twisted Pair)
●
Ready-made cables that can be ordered:
–
RKB0021
Long cables (100 m at maximum) to connect the drive system to the
higher-level control unit or remote communication nodes.
Minimum bending radius:
–
48.75 mm with flexible installation
–
32.50 mm with permanent installation
Order code for a 30 m long cable: RKB0021/030,0
–
RKB0013
Short cables to connect devices arranged side by side in the control
cabinet.
4 lengths available: 0.19 m; 0.25 m; 0.35 m; 0.55 m
Order code for a 0.55 m long cable: RKB0013/00,55
Minimum bending radius: 30.75 mm
Tab. 6-4:
Function, pin assignment, properties
IndraDrive Mi Drive Systems with KCU02, KSM02,
KMS02/03, KMV03, KNK03, KLC03
Function
Transmit, Differential Output A
Transmit, Differential Output B
Receive, Differential Input A
-
-
Receive, Differential Input B
-
-
Shield connection
Advertisement
Table of Contents
