IndraDrive Mi Drive Systems with KCU02, KSM02,
KMS02/03, KMV03, KNK03, KLC03
Analog outputs
Oscilloscope function
Patch function
Monitoring function
Logbook function
Commissioning, operation, diagnostics and maintenance
●
E3 (X38.4): +24 V to activate drive enable
See Functional Description of firmware → "Easy startup mode".
KSM/KMS have no analog outputs!
It is possible to use the oscilloscope function integrated in the drive and
described in the Functional Description of the firmware!
See Functional Description of firmware → "Oscilloscope function".
With the patch function you can read or write controller-internal memory cells.
See Functional Description of firmware → "Patch function".
The monitoring function provides extended diagnostic possibilities.
See Functional Description of firmware → "Monitoring function".
With the logbook function you can reproduce the internal firmware sequence.
See Functional Description of firmware → "Logbook function".
R911335703_Edition 04 Bosch Rexroth AG
355/407