Table of Contents
Advertisement
346/407
Commissioning, operation, diagnostics and maintenance
H14
Significance (drive status)
Color / flashing
pattern
1)
Flashing yellow Drive warning (E2xxx ... E3xxx)
Communication warning (E4xxx)
Travel range warning (E6xxx ... E7xxx)
Drive controller identification
Yellow
Fatal warning (E8xxx)
Flashing red-
Drive is error-free (phase 0), but not yet
yellow
ready for drive enable ("Bb")
Drive is error-free (phase 1), but not yet
ready for drive enable ("Bb")
Communication error (F4xxx)
Flashing red-
Baud rate scan (P‑1)
green
Flashing red
Error (F2xxx, F3xxx, F6xxx, F7xxx, F8xxx)
Firmware update:
Red
Booting phase
System error (F9xxx, E0800)
Bosch Rexroth AG R911335703_Edition 04
1)
A square in the illustrated flashing patterns corresponds to a
time period of 250 ms.
Tab. 11-4:
LED Displays H14
Diagnostic display with MPx-2x
See
tab. 11-2 "LED displays" on page
IndraDrive Mi Drive Systems with KCU02, KSM02,
KMS02/03, KMV03, KNK03, KLC03
Measures
Read exact status via "S‑0‑0095, Diagnostic
message" and execute service function
Do not interrupt the 24-V supply and do not unplug
connectors while the firmware is being updated
If necessary, read exact status via "S‑0‑0095,
Diagnostic message"
If necessary, read exact status via "S‑0‑0095,
Diagnostic message"
Read exact status via "S‑0‑0095, Diagnostic
message" and execute service function
Repeat firmware update
Wait until booting phase is over (approx. 2
minutes)
●
Switch off and on; replace hardware, if
necessary
●
Check whether the programming module is
inserted; if necessary replace KSM/KMS
crosswise to check whether the
programming module is defective
341.
Advertisement
Table of Contents
