Table of Contents
Advertisement
308/407
Accessories
10.8.2
HAS05.1-021-NCN-NN
Bosch Rexroth AG R911335703_Edition 04
Fig. 10-7:
HAS05.1-021-NCN-NN, hybrid joint with 42 V connection (X37)
The accessory is a very short hybrid cable and connects two devices
mounted side by side.
●
Hybrid cable with communication
●
Distance, connector center – connector center: 62 ... 87 mm
●
Degree of protection IP65
●
M12 female connector (X37) to connect an additional 42 V power supply
–
Control voltages galvanically isolated between the zones before
and after the accessory
–
Allowed current: 15 A
–
Degree of protection: IP65
–
External power supply required (42 V
"CPS20.361" (100‑240 V, 480 W) or "QT20.361" (380‑480 V,
480 W)
●
Material number: R911392277
The accessory allows the drive line to be expanded by more components, if
one of the following conditions applies:
●
Power of the DC/DC converter (24V/42V) in KCU or KMV has already
been used to capacity (e.g., due to many motors with integrated holding
brakes)
●
Voltage drop on the control voltage lines in the hybrid cable has reached
its allowed limit (e.g., due to long cables)
IndraDrive Mi Drive Systems with KCU02, KSM02,
KMS02/03, KMV03, KNK03, KLC03
, ±10%; e.g., PULS
DC
Advertisement
Table of Contents
