Open An Existing Marking File From The Laser Marking System - Panasonic LP-GS Series Operation Manual

6 Work with files
6. In the dialog, select "OK".
The marking file is saved under the name "No Name". To edit the name of the marking
file, select the icon in the tab on top of the marking image editor.
Alternatively, you can change the name of the marking file on the "Data management"
screen.
Related topics
About marking files
Online connection between PC and laser marking system
Edit marking data
Manage files in the laser marking system
Rename a marking file
6.3.2

Open an existing marking file from the laser marking system

You can open an existing marking file from the laser marking system, make changes and
save your changed file.
1. Establish an online connection between your PC and the laser marking system.
2. Go to the "Marking settings" screen and select "Open" > "From laser marking system".
A dialog opens and shows a list of all marking files saved on the laser marking system.
This dialog also appears automatically right after the online connection is established.
3. Select a marking file from the list.
4. Select "OK".
The file opens in the marking image editor.
If the laser marking system is in remote mode, the marking file selected in the laser
marking system opens in the "Monitor" screen.
5. You can edit marking objects and specify the marking settings.
6. When you finish the editing process, save the changed marking file on the laser marking
system.
Related topics
About marking files
Online connection between PC and laser marking system
Edit marking data
Save a marking file to the laser marking system
Manage files in the laser marking system
64
(page 60)
(page 83)
(page 71)
(page 72)
(page 60)
(page 83)
(page 71)
(page 39)
(page 39)
(page 65)
ME-NAVIS2-OP-1