21
File setting
21.1
Position, rotate and mirror all objects in a file
In the "File settings" tab, you can position, rotate or mirror all objects in a marking file.
•
Go to the "Marking settings" screen and select "File settings".
•
You can specify different parameters to correct the marking position.
The following figure shows these parameters.
The reference point of the movement is the center of the marking field.
(5)
(1) X-movement
(2) Y-movement
(3) Z-movement
(4) Rotation (-)
(5) Rotation (+)
•
"X-movement [mm]", "Y-movement [mm]":
Enter a value to move all marking data in a file along the x-axis and y-axis.
The orientation of the x- and y-axis is defined by the head direction setting.
•
"Z-movement [mm]" (LP-GS except LP-GS051-L):
Enter a value to position all marking data in the file along the z-axis.
•
"Rotation movement [°]":
Specify an angle to rotate all marking data in the file. The rotation center is the center
of the marking field. Enter a positive value for counterclockwise rotation and a negative
value for clockwise rotation.
•
"X-axis mirroring", "Y-axis mirroring":
Select the axis across which you want all objects in a file to be mirrored. You can mirror
the objects across the x-axis, the y-axis or both.
ME-NAVIS2-OP-1
(3)
+
(2)
-
(4)
(1)
21 File setting
223