Siemens KION Service Manual page 116

Troubleshooting
Diagnostic Log example
6
CPS/IDS Diagnostic Log example
6 - 22
Downloaded and printed logs
The Diagnostic Log and the CPS/IDS Diagnostic Log
can be downloaded to a PC or printed on a laser
printer. The procedures for downloading and printing
is described in chapter "Service procedures".
Example of downloaded or printed Diagnostic Log
and CPS/IDS Diagnostic Log can be found in the
adjacent illustrations.
Log content
The events are displayed in order Oldest to Newest.
The following information is shown in the logs:
• Sequence #: Not intended for service purpose.
• Entry #: Not intended for service purpose.
• Event ID: Can be used to identify some multigas
analyzer logs.
• Event Class: Not intended for service purpose.
• Dup Cnt: Counts if a log is repeted several times
within a short time frame without interruption of
other logs. See further information regarding the
"Dup Cnt" on page 20.
• Fail state: Not intended for service purpose.
• Date: Date stamp (month/day/year) of the event.
• Time: Time stamp (h:min) of the event.
• OS Time from startup (in 1/100 s):
– Diagnostic Log: Time from monitor startup.
– CPS/IDS Diagnostic Log: Time from KION startup.
• Filename: Not intended for service purpose.
• Line Number: Not intended for service purpose.
• Description:
– Diagnostic Log: The log description written in
decimal numbers.
– CPS/IDS Diagnostic Log: Log description written
in hexadecimal numbers containing:
– Log number. 4 characters to be found directly
after the hex-number 55.
– Sub data. All 10 characters to be found directly
after the Log number. In most of the logs, only
Log Sub-
the 4 last subdata characters are used. Only
number data
logs 120 and 185 uses all 10 characters.
• Software Version:
– Diagnostic Log: Software version installed in the
KION Monitor.
– CPS/IDS Diagnostic Log: Software version
installed in the CPS / IDS.
Siemens-Elema AB
KION / KION-i
E382 E392E 061 01 02 02