Service Procedures - Siemens KION Service Manual

KION / KION-i
Only personnel trained and authorized
by Siemens shall be permitted to
perform installation, service or
maintenance of the KION / KION-i
workstation.
Make sure to prepare the KION / KION-i
workstation properly before disassembling and
assembling. Refer to section "Hazard notices" in
chapter "Important".
Any service or maintenance must be noted in a
log book.
Discard disposable, replaced and left-over parts in
accordance with appropriate industrial and
environmental standards.
After any installation, maintenance or service
intervention in the KION / KION-i, perform a
"Calibration" and a "Function check".
Refer to the "KION / KION-i anesthesia
workstation – Operating Manual" for details.
E382 E392E 061 01 02 02

5. Service procedures

Pre-use check ........................................................ 5 - 2
Initialization ....................................................... 5 - 2
Check of control panel setting and
of gas supply .................................................... 5 - 2
Leakage automatic ventilation ......................... 5 - 2
Leakage manual ventilation .............................. 5 - 4
Checking pressure transducers ....................... 5 - 5
Checking flow transducers .............................. 5 - 6
Checking bellows level detector ...................... 5 - 8
Checking mushroom valves ............................. 5 - 9
Checking alarm detectors .............................. 5 - 10
Ending the Pre-use check .............................. 5 - 10
Calibration ............................................................ 5 - 11
Initialization ..................................................... 5 - 11
Check of control panel setting and
of gas supply .................................................. 5 - 11
Calibrating pressure transducers ................... 5 - 11
Checking barometer ....................................... 5 - 15
Ending the Calibration .................................... 5 - 15
Software installation ............................................ 5 - 16
CON-SW ......................................................... 5 - 16
MEA-PROM .................................................... 5 - 16
ALA-PROM ..................................................... 5 - 16
PAN-PROM ..................................................... 5 - 16
MGI-PROM ..................................................... 5 - 16
KION MONITOR-SW ...................................... 5 - 16
CPS-SW alt. IDS-SW ...................................... 5 - 16
SDC-SW .......................................................... 5 - 18
MGA-SW ......................................................... 5 - 19
Connecting a PC to the KION / KION-i ................ 5 - 19
Connection and setup .................................... 5 - 19
Access the diagnostic logs from a PC ........... 5 - 20
Connecting a Recorder and/or a Laser Printer .... 5 - 21
KION / KION-i as a stand-alone unit ............... 5 - 21
KION / KION-i in a network ............................ 5 - 21
Printing the diagnostic logs ............................ 5 - 21
Siemens-Elema AB
Service procedures
5
5 - 1