Siemens KION Service Manual page 64

Disassembling and assembling
4
@
.
4 - 18
= ?
A


• Remove the screws (6) and lift off the cover
plate (7) from the docking station.
• Loosen the screw (8) and remove the locking
handle (9).
• Pull out and lift off the lifter (10).
• Carefully pull down the support plate for patient
cassette (11) and remove it from the patient unit.
The excenter (12) is intended for adjustment of the
patient cassette support plate position:
• For adjustment, refer to instructions for the
"Support plate adjustment tool".
• For replacement of the complete locking device,
excenter (12) and lifter (10), refer to instructions for
the "Cassette locking device repair kit".
The assembling procedure for the patient unit is the
reverse of the disassembling procedure previously
performed.
Siemens-Elema AB
KION / KION-i
E382 E392E 061 01 02 02