Siemens KION Service Manual page 67

KION / KION-i
E382 E392E 061 01 02 02
;
Siemens-Elema AB
When mounting the front panel to the control panel
housing:
• Check that the adhesive strips (4) are properly
attached to the control panel housing and that no
parts of the strips are missing.
• Remove the protective foil from the rear side of the
front panel.
• Mount the front panel on the control panel housing.
Check that the LEDs on PC 1672 align with the
corresponding holes in the front panel.
Disassembling and assembling
4 - 21
4