The base holds the electronic board in its interior. Screws secure the board to the base, and the
mounting clips are accessible on the exterior.
Figure 2-2: RMC-100 housing base exterior
1
5
1
Legend for Figure 2-2: RMC-100 housing base exterior
ID
Description
1
Housing slot (secures top cover)
2
Spring release clip
(secures RMC to DIN rail)
3
Vents
IMPORTANT NOTE: The RMC has grounding clips attached to the bottom of the electronic board.
The grounding clips fit through the base grounding slots to contact the DIN rail when mounted. Be
sure to ground the DIN rail.
2.1.1
LCD display
The display assembly consists of the graphic LCD display and the directional buttons that navigate
through the display groups and associated variables. The display parameters are read-only.
The LCD size measures approximately 1⅝ x 2⅞ inches, with 128 x 64 pixels for display status and
configuration data.
Table 2-1
display.
Table 2-1: LCD display characteristics
Characteristic
Number of lines on the display
Maximum number of characters per line
Figure 2-2
2
2
provides the LCD display characteristics and
Display
8 lines
21
identifies the exterior of the housing base.
1
3
4
5
1
ID
Description
4
Horizontal DIN rail slot
5
Grounding slot
(for the electronic board grounding clips)
Figure 2-3
21 05 55 2MN A E | RM C-1 00 | 1 3
shows the