ABB RMC-100 User Manual page 71

1. If modules were installed in TFIO-A, select TFIO-A Modules on the navigation tree. The TFIO
Module Setup tab displays
Figure 4-33: TFIO-A Modules Setup
2. Click the TFIO Module List tab
3. Verify all TFIO modules are connected and their type listed.
Figure 4-34: TFIO-A Module List
4. If modules were installed in TFIO-B, select TFIO-B Modules on the navigation tree. The TFIO
Bus Enable tab displays
(Figure 4-33).
(Figure 4-34):
(Figure 4-35).
21 05 55 2MN A E | RM C-1 00 | 7 1