Figure 8-30: Warm restart with device loader
6.
Click Help for more information.
8.5.4
Warm restart from PCCU Entry mode
To restart the controller from PCCU Entry mode:
1.
Launch PCCU32 and click Entry.
2.
Click View on the PCCU32 menu and select Expert from the drop-down list.
3.
Click the Station ID at the top of the navigation tree. The Station Setup tab displays.
4.
Scroll down to System Startup/Shutdown
5.
Select Yes from the System Shutdown / then Reset drop-down list.
6.
Click Send.
Click OK to confirm.
7.
Figure 8-31: Warm restart on the Station Setup tab (Expert view)
8.5.5
Warm restart from terminal mode
This procedure performs the warm restart from the terminal mode. It causes the device to restart with
the running (warm) configuration.
Follow this procedure remotely, or while physically connected to the device. Invoke Terminal mode
from entry mode or from the PCCU splash (main) screen. This method of warm restart requires you to
type a command.
To restart the controller using terminal mode:
(Figure
8-31).
21 05 55 2MN A E | RM C-1 00 | 1 9 1