ABB RMC-100 User Manual page 160

Figure 7-49: Analog Output calibration complete
15. Click OK. The Eng. Units, %FS, and mA fields should display full scale values
mA field displays the high value of the AO signal. This is 20 mA or 100% of the output signal.
IMPORTANT NOTE: The Eng. Units field value matches the mA field value when the Engineering
unit range is the default, 4 -20 mA. With non-default ranges (see section
unit range) the Eng. Units field value is different from the AO signal value.
1 6 0 | R MC-1 00 | 2 10 5 55 2MN A E
(Figure 7-50). The
7.2.3 Define engineering