Enclosures; Table 2-2: Xcore Enclosures Available - ABB RMC-100 User Manual

Characteristic
Character font size
Number of items displayed at one time
Annunciator font size
Annunciator position
Annunciator position control
Annunciator and plots
Number of plots displayed at one time
Each display item has two lines as the data scrolls up the screen. The name of the item is on the first
line. The measurement value and unit display on the second line. A blank line displays between the
two items. The plot for the item displays on the right side of the display.
Figure 2-3: LCD Display
DATE/TIME
02/28/16 13:00:26
NAME
DATA
Four directional buttons control and display items from the LCD interface. The button directions are:
up, down, left (previous) and right (next). Use the up and down buttons to view individual display
items for a display group. Use the left and right buttons to view the display groups. By default, the
first annunciator displays the selected group. The directional buttons do not allow any data entry.
2.1.2

Enclosures

The RMC can be purchased already installed in an enclosure. ABB offers the Xcore enclosures
described in Table 2-2. For more information and complete specifications see
www.abb.com/upstream.

Table 2-2: Xcore enclosures available

Part number Size
2424 24 x 24 x 12 inches (61 x 61 x 30 cm)
3630 36 x 30 x 12 inches (91 x 76 x 30 cm)
1 4 | R MC-1 00 | 2 10 55 5 2MN A E
Display
8 x 6 pixels
2 items (each item uses 2 lines to display)
16 x 12 pixels
Lines 7 and 8
Fixed
Displays both at the same time
2
UNITS
Annunciators
Weight
45 pounds maximum
(Fully loaded system)
75 pounds maximum
(Fully loaded system)