ABB RMC-100 User Manual page 78

Figure 5-5: Factory default Display setup (Advanced view)
IMPORTANT NOTE: This procedure changes the number of display groups to two. The factory
default group is intact. A new display group is configured to display application-specific values in
section 5.4.3
required.
To establish the number of display groups:
Click Display on the navigation tree to display the Setup tab.
1.
Figure 5-6: Default Display setup
2. Type into Number of Display Groups the number of the groups to scroll and display on the LCD.
In this example, type 2 into the field
7 8 | R MC-1 00 | 2 10 55 5 2MN A E
Configure a display group. Configure additional display groups for your scenario as
(Figure 5-7).