Cold Restart From Terminal Mode - ABB RMC-100 User Manual

Figure 8-34: Cold restart using the device loader
6. Click Help for more information.
8.5.7

Cold restart from terminal mode

This procedure performs the cold start from the terminal mode. It causes the device to restart using
the startup (cold) configuration.
Perform the procedure on either a local or remote connection. However, ABB highly recommends local
cold restarts with this method. Invoke Terminal mode from entry mode or from the PCCU splash
(main) screen. This method of cold restart requires you to type a command.
NOTICE – Loss of data. Perform the procedures in section
configuration before a cold start. This avoids loss of the data and the need for a complete
system reconfiguration. If the startup (cold) configuration does not have the latest network
connection configuration, the restart causes loss of network connectivity. Updating the
startup configuration (tfCold) avoids loss of network connection and reconfiguration.
To restart from terminal mode:
1. Launch PCCU.
2. Click the Entry icon in the toolbar. The Entry screen displays.
3. Click Operate in the menu bar and select Communications>Terminal from the drop-down
list (Figure 8-35). The Terminal screen displays.
8.1 Preserve data and
21 05 55 2MN A E | RM C-1 00 | 1 9 3