ABB RMC-100 User Manual page 72

Figure 4-35: TFIO-B Bus Enable tab (bus disabled by default)
Select the TFIO-B Bus field to change to Enabled.
5.
Click Send. The TFIO Bus Enabled screen clears and the navigation tree refreshes.
6.
7. Select TFIO-B Modules from the navigation tree. The TFIO Module Setup tab displays
4-36).
Figure 4-36: TFIO-B Module Setup
8. Click the TFIO Module List tab.
9. Verify all TFIO modules are connected and their type listed
7 2 | R MC-1 00 | 2 10 55 5 2MN A E
(Figure 4-37).
(Figure