ABB RMC-100 User Manual page 140

Figure 7-20: AI 2 default calibration values
10. Click Calibration and select 3 point or 5 point from the drop-down list
11. Verify that only the Zero Input and Low-Cal Point buttons are enabled and highlighted. The
system enables the buttons in the order required for the calibration.
Figure 7-21: Analog Input 2 tab with default values
12. Click Range. The Analog Input 2 Range dialog displays
1 4 0 | R MC-1 00 | 2 10 5 55 2MN A E
(Figure
(Figure 7-22).
7-21).