Operation panel FR-DU07
4.3.7
Change the parameter setting value
Example
Change the Pr. 1 "Maximum frequency".
Screen at powering on
The monitor display appears.
Press the PU/EXT key to choose the PU
operation mode.
Press the MODE key to choose the parameter
setting mode.
Turn the digital dial until P.1 (Pr. 1) appears.
Press the SET key to show the currently set value.
The initial value "120.0" appears.
Turn the digital dial clockwise to change it
to the setting value of "50.00".
Press the SET key to set.
By turning the digital dial, you can read another parameter.
Press the SET key to show the setting again.
Press the SET key twice to show the next parameter.
Press the MODE key twice to return the monitor to frequency monitor.
Fig. 4-8: Setting the maximum frequency
4 - 10
Operation
Operation
Display
PU indication is lit.
The parameter number
read previously
appears.
Flicker ... Parameter setting complete!
I001462E