Note: I∗1 and I∗2 are phase currents of remote terminal 1 and remote terminal 2. V11 and V12
are symmetrical component voltages of remote terminal 1 and remote terminal 2.
The lines which are not displayed in the window can be displayed by pressing the
keys.
To clear all the fault records, do the following:
• Open the "Record" sub-menu.
• Select 1 (=Fault record) to display the "Fault record" screen.
• Select 2 (=Clear) to display the following confirmation screen.
/ 2
F a u l t
C l e a r
a l l
• Press the ENTER (=Yes) key to clear all the fault records stored in non-volatile memory.
If all fault records have been cleared, the "Latest fault" screen of the digest screens is not
displayed.
4.2.3.2
Displaying Event Records
To display event records, do the following:
• Open the top "MENU" screen by pressing any keys other than the VIEW and RESET
keys.
• Select 1 (=Record) to display the "Record" sub-menu.
• Select 2 (=Event record) to display the "Event record" screen.
E
v e
n
/ 2
1 =
D
i s
p
l
• Select 1 (=Display) to display the events with date and time from the top in new-to-old
sequence.
/ 3
E v e n t
2 3 / O c t / 1 9 9 7
2 3 / O c t / 1 9 9 7
1 6 / A u g / 1 9 9 7
The lines which are not displayed in the window can be displayed by pressing the
keys.
To clear all the event records, do the following:
• Open the "Record" sub-menu.
• Select 2 (=Event record) to display the "Event record" screen.
• Select 2 (=Clear) to display the following confirmation screen.
r e c o r d
f a u l t
r e c o r d s ?
E N T E R = Y e s
t
r e c o r
d
2 = C l e a r
y
r e c o r d
1 8 : 1 8 : 5 8 . 2 5 5
1 8 : 1 3 : 5 8 . 0 2 8
6 : 1 3 : 5 7 . 7 7 3
196
C A N C E L = N o
D S
O n
O
D S
f f
C o m . 1
f
a
i
6 F 2 S 0 8 5 0
and
3 / 2 1
l
O
f
f
and