SUB2_COM1 to SUB2_COM12: These commands are assigned to bits (RA∗) for relay address
monitoring RYIDSV as default setting. If the RYIDSV is not used, the user
can use these commands. If multi-phase autoreclosing function is applied,
for example, these commands are assigned to CBDS-A, -B and –C such as
shown in Figure N-1.
SUB3_COM1 to SUB3_COM12: These commands are also assigned to bits (RA∗) for relay
address monitoring RYIDSV as default setting. If the RYIDSV is not used,
the user can use these commands.
422
6 F 2 S 0 8 5 0