Assemble Cables - NEC iPASOLINK EX Advanced Instruction Manual

CONNECT CABLES

5.8 Assemble Cables

5.8.1 Grounding Cable
5.8.1.1
Grounding Cable
Grounding Terminal
Hand Tools
5.8.1.2
1. Cut the AWG10 cable to the appropriate length.
2. Strip approximately 7 mm of cable sheath from one end of each cable.
CABLE SHEATH
3. Slide the insulation sleeve onto the cable.
iPASOLINK EX Advanced: I
Outlines of Parts
Table 5-5 List of Applicable Cable
Parts
AWG10
(IEC60204-1)
Ring Terminal
(for M5 Screw Type)
Insulation Sleeve
Screwdriver
Crimping Tool
Wire Stripper, Wire
Cutter, etc.
Procedure
Slide
NSTALLATION
Description

Outer Color: Green and Yellow
Flat-blade, Phillips-head
1~2 mm
(RING TERMINAL)
5.0 mm
——
——
INSULATION SLEEVE
GGS-000546-01E
5-19