NEC iPASOLINK EX Advanced Instruction Manual page 508

Set ETH Function
4. Select a Protocol to be tunneled, then click the OK button.
Figure 8-263 L2CP Transparent Setting Option Window
5.
Figure 8-264 Information Dialog Box
iPASOLINK EX Advanced: S
Table 8-48 L2CP Transparent/Mirroring Setting Parameters
Parameter Value
L2 Protocol Transparency
Tunnel
(check
Enable
box)
NOTE: STP/RSTP Tunnel is not supported on the RSTP enabled port.
Information
dialog box appears. Click the
The window returns to
N S
ET ETWORK AND YSTEM
Description
Tick a box of protocol to enable its PDU to transparent
without processing.
OK
L2CP Transparent Setting
P
ROVISIONING
button to proceed.
window.
GGS-000547-01E
8-189