Table of Contents
Advertisement
8-108
9. Assign the appropriate values, then click the
Figure 8-150 Step 2 ERP VLAN Setting Option Window
Parameter
Control VLAN ID
Control MAC Address
R-APS Message Priority
R-APS Message MEG Level
Traffic VLAN ID
Enable
GGS-000547-01E
Table 8-27 Step 2 ERP VLAN Setting Parameters
Value
1 to 4094
01 to FF
0 to 7
0 to 7
(check box)
Next
Description
A VLAN ID is used for R-APS transmission. Control VLAN ID
for each Ring must be unique. To use Virtual Channels within
the Sub-Ring, this Control VLAN ID must be registered for
the Traffic VLAN ID of the Upper Ring.
Specify the last two digits of the address.
VLAN CoS field of R-APS frame. [default: 7]
MEG level of R-APS message. [default: 7]
Tick the check box to enable the use of Traffic VLAN ID
iPASOLINK EX Advanced: S
Set ETH Function
button:
N
S
P
ET
ETWORK AND
YSTEM
ROVISIONING
Advertisement
Chapters
Table of Contents
