Module-Bb; Mute Status; Own Clock Id; Ptp Clock Quality Level - NEC iPASOLINK EX Advanced Instruction Manual

CORRECTIVE MAINTENANCE

Module-BB

This condition indicates that the system detects the equipment failure in the BB
section. If this alarm occurs, contact NEC for the further maintenance support.

Mute Status

This condition is not an alarm. The message indicates if the RF TX Power Output is
set to

Own Clock ID

This condition is not an alarm. The message shows the PTP Clock of the equipment.

PTP Clock Quality Level

This condition is not an alarm. The message indicates the level of PTP Clock Quality.

PTP Mode Setting Mismatch

This condition indicates that the settings of PTP Mode at two opposing NEs do no
match.
Procedure 5-25
1.
2.
iPASOLINK EX Advanced: O
or not.
Mute
Check the settings of following:
 .Check and adjust the PTP Mode settings of both local NE and its opposing
NE.
 Check and adjust the Equipment Clock settings of both local NE and its
opposing NE
Retrieve the
Current Status
alarm is cleared. If the alarm is not cleared, contact NEC for the further
maintenance support.
This step ends the procedure.
& M
PERATION AINTENANCE
, and check if the
PTP Mode Setting Mismatch
5-39
Equipment
RF
Equipment
Equipment
MODEM
GGS-000548-01E