NEC iPASOLINK EX Advanced Instruction Manual page 325

8-6
4. Assign the appropriate value to each parameter:
Figure 8-2 Bridge Setting Option Window
Parameter
VLAN Mode
Default VID
Default VLAN TPID (C-Tag)
Default VLAN TPID (S-Tag)
5. When completed, click the
6. Click the
Figure 8-3 Information Dialog Box
GGS-000547-01E
Table 8-1 Bridge Setting Parameters
Value Description
802.1q
Allows the port for different VLANs to communicate with
each other through a Layer-3 network device.
802.1ad
Allows the switches in a service provider network to
transparently carry customer's Layer-2 control frames,
separate from the service provider's traffic and from other
traffic in the service provider's network.
1 to 4094 Enter the default VID of the equipment. [default: 1]
0 x Specifies the TPID (Tag Protocol Identifier) value of VLAN.
8100 to FFFF [default: 8100 (in mode 802.1q)]
Specifies the TPID (Tag Protocol Identifier) value of VLAN.
[default: 88a8 (in mode802.1ad)]
OK
OK
button to proceed.
iPASOLINK EX Advanced: S
Information
button. dialog box appears.
N
ET ETWORK AND
Set ETH Function
S P
YSTEM ROVISIONING