Table of Contents
Advertisement
3-30
5. Assign the appropriate value to each parameter:
Figure 3-27 NTP Setting Option Window
Parameter
NTP
NTP Server Mode
NTP Client Mode
Stratum
NTP Authentication
Multicast Auth Key
Index
Multicast Port
Multicast Interval
GGS-000547-01E
Table 3-16 NTP Setting Parameters
Value
Enable
Disable
Multicast
Unicast
Disabled
Multicast
Unicast
Disabled
2 to 15
Enable
Disable
Not Used
(available Auth Key Index #)
Bridge01 to Bridege06
16 to 131072s
Description
Enable/Disable the NTP Protocol on the equipment.
Specify the NTP Server mode.
Specify NTP Client mode.
Set Stratum level of the NTP Time Packets. The
lowest Stratum should be received in NTP PDU plus
1.
Enables the use of NTP Authentication.
Disables the use of NTP Authentication.
To assign the Auth Key Index, select the index number
from the drop-down list. Otherwise, select Not Used.
Select a port to output the Multicast Time information.
This parameter is enabled when NTP Server Mode
selects Multicast.
Select Multicast Interval. [unit: second]
iPASOLINK EX Advanced: S
SECURITY MANAGEMENT
N
S
P
ET
ETWORK AND
YSTEM
ROVISIONING
Advertisement
Chapters
Table of Contents
