8-204
8.16 Broadcast Storm Control Setting
Following procedure sets the input rate for the broadcast storm control, and enables/
disable the Broadcast Storm Control per Ethernet port (including MODEM port).
8.16.1 Set Broadcast Strom Control Rate
Procedure 8-64
1. Launch and log in to
2. In the
3. Click the
Figure 8-288 Broadcast Storm Control Setting Window
GGS-000547-01E
WebLCT
MENU
frame on the left, expand
Function Setting
to select
Storm Control Setting
Broadcast Storm Control Rate
Broadcast Storm Control Rate
The
.
Provisioning
Broadcast Storm Control Setting
window appears.
.
Broadcast Storm Control Rate
option window appears.
iPASOLINK EX Advanced: S
Set ETH Function
, then its submenu
. The
N
S
P
ET
ETWORK AND
YSTEM
ETH
Broadcast
ROVISIONING