Ptp Radio Clock Status; Ptp Source Status; Ptp Sync. Time; Quality Level - NEC iPASOLINK EX Advanced Instruction Manual

5-40

PTP Radio Clock Status

This condition is not an alarm. The message indicates the state of PTP Radio Clock.

PTP Source Status

This condition is not an alarm. The message indicates the selected Master to which
the PTP-BC function synchronizes.

PTP Sync. Time

This condition is not an alarm. The message indicates the time when synchronizing
with Master using the PTP function. The indicated time does not show the date or
time of Management.

Quality Level

This condition is not an alarm. The message indicates the quality level of the Timing
Clock.

RDI

This condition indicates that RDI (Remote Defect Indication) signal is detected.
Procedure 5-26
1.
2.
GGS-000548-01E
Check if any alarm(s) occur(s) in the far-end NE. If any exist(s), correct it/them.
Retrieve the
Current Status
not cleared, contact NEC for the further maintenance support.
This step ends the procedure.
, and check if the
RDI
iPASOLINK EX Advanced: O
CORRECTIVE MAINTENANCE
Equipment
Equipment
Equipment
Equipment
alarm is cleared. If the alarm is
& M
PERATION AINTENANCE
MODEM