NEC iPASOLINK EX Advanced Instruction Manual page 257

5-30
4. Specify the filter condition:
Figure 5-45 Input Filter Entry (Add) Option Window
Parameter
Entry No.
Input Index
Source IP Address
Source Subnet
Mask
Protocol
Destination Port
Action
GGS-000547-01E
Table 5-9 Input Filter Entry (Add) Parameters
Value
1 to 50
Any
Bridge01 to Bridge06
x.x.x.x
x.x.x.x
Any
ICMP
TCP
UDP
Other
Any (check box)
1 to 65535
Permit
Deny
iPASOLINK EX Advanced: S
Description
Specify the entry number.
Select the ingress port.
Specify the source IP Address of the incoming packets.
(0.0.0.0: Any)
Specify the Subnet Mask of the source IP Address of the
incoming packets. (0.0.0.0: Any)
Selects no specific Protocol.
Selects Internet Control Message Protocol.
Selects TCP/IP Protocol. Selecting this option enables the
Destination Port option.
Selects User Datagram Protocol. Selecting this option
enables Destination Port option.
Selecting Other enables the field below to set the Port
Number. Valid values are 1 to 255.

Check (leave a tick in the check box) to set no specific
port for the destination.

Uncheck (remove a tick from the check box) to specify
the destination port.
Select a port for the destination.
Allows the packets that meet the specified conditions.
Discards the packets that meet the specified conditions.
ET
NETWORK MANAGEMENT
N S P
ETWORK AND YSTEM ROVISIONING