NEC iPASOLINK EX Advanced Instruction Manual page 411

8-92
4. Assign the appropriate value to each parameter:
Figure 8-130 Detail STP Parameter Setting Option Window
Parameter
Bridge Priority (RSTP)
STP Bridge MAX Age
STP Bridge Hello Time
STP Bridge Forward Delay
STP TX Hold Count
5. When completed, click the
6. Click the
Figure 8-131 Information Dialog Box
GGS-000547-01E
Table 8-23 Detail RSTP Parameter Setting
Value Description
0 to 61440
Sets STP Priority of the bridge. [granularity: 4096]
6 to 40
Sets the period to store the BPDU Configuration.
Bridge acknowledges that a topology change has
occurred when the MAX Age passes putting the
BPDU aged out. [unit: second]
1
Sets the period for sending the BPDU Configuration
from Root Bridge. [unit: second]
2
4 to 30
Sets the delay period to execute the change from the
Listening Port to Learning Port.
 The value of this option should be greater than that
[unit: second]
1 to 10
Sets the number of BPDUs that can be sent per
second.
OK
OK
button to proceed.
iPASOLINK EX Advanced: S
of the STP Bridge MAX Age.
button. Information dialog box appears.
N
ET ETWORK AND
Set ETH Function
S P
YSTEM ROVISIONING