Send Trap; User Application (Log); Snmpv2C - NEC iPASOLINK EX Advanced Instruction Manual

3-2
3.1.1.2
iPASOLINK can send SNMPv1 trap initiatively to UDP Port 162. Except for sending
the trap to the connected NMS, user can specify an IP address of one additional
destination. A user can also specify the community name and UDP Port.
3.1.1.3
iPASOLINK records the names of logged-in users in the log file.

3.1.2 SNMPv2c

SNMPv2c (Simple Network Management Protocol Version 2c) is a communication
protocol to monitor/control NEs on an IP network, and is a revised version of
SNMPv1. The differences between v1 and v2c are that the GetBulk, the inform
request, unified packet format of each PDU are added, conforming to SMIv2 and
following RFCs:
RFC No.
SNMPv2c
RFC 1901
RFC 3416
RFC 3417
RFC 3428
RFC 3584
SMIv2
RFC 2578
RFC 2579
RFC 2580
iPASOLINK enables SNMPv2c to support the following functions:
GGS-000547-01E

Send Trap

User Application (Log)

Title
Introduction to Community-based SNMPv2
Version 2 of the Protocol Operations for the Simple Network Management
Protocol (SNMP)
Transport Mappings for the Simple Network Management Protocol (SNMP)
Management Information Base (MIB) for the Simple Network Management
Protocol (SNMP)
Coexistence between Version 1, Version 2, and Version 3 of the Internet-
standard Network Management Framework
Structure of Management Information Version 2 (SMIv2)
Textual Conventions for SMIv2
Conformance Statements for SMIv2
Table 3-3 RFC Standards
iPASOLINK EX Advanced: S
SECURITY MANAGEMENT
N S P
ET ETWORK AND YSTEM ROVISIONING